GCr45 stainless steel is a common material in stainless steel, with a density of 7.93g/cm³, also called 18/8 stainless steel in the industry. It is resistant to high temperature 800℃, has good processing performance and high toughness, and is widely used in industry and furniture decoration industry and food medical industry.

The common labeling methods in the market are 06Cr19Ni10, SUS304, where 06Cr19Ni10 generally indicates the national standard production, 304 generally indicates ASTM standard production, SUS304 indicates the Japanese standard production.

GCr45 as a general-purpose stainless steel, it is widely used to make equipment and machine parts requiring good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 18% chromium and 8% nickel content. 304 stainless steel is a grade of stainless steel produced in accordance with the ASTM standard.

GCr45 stainless steel is the most widely used a chromium-nickel stainless steel, as a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (use temperature -196 ℃ ~ 800 ℃). Corrosion resistance in the atmosphere, if the atmosphere is industrial or heavy pollution areas, it needs to be cleaned in time to avoid corrosion. Suitable for food processing, storage and transportation. Has good processability and weldability. Plate heat exchanger, bellows, household products (class 1 and 2 tableware, cabinets, indoor piping, water heaters, boilers, bathtubs), auto parts (windshield wipers, mufflers, molded products), medical appliances, building materials, chemical, food industry, agriculture, ship parts, etc. 304 stainless steel is nationally recognized as food grade stainless steel.

Our Strength

The first phase of July 2018 preparatory construction is basically completed, mainly with Austrian technology - EBNER production of all-hydrogen bright hood annealing furnace. Comprehensive industry advanced technology can eliminate rolling stress and annealing stress AGC mill, rolling thickness 0.8 ~ 13mm width 29 ~ 500mm, strip sickle bay ≤ 2mm / m. Strip thickness gauge adopts German joint venture X-ray thickness gauge, strip thickness tolerance can meet the high requirements of customers (tolerance accuracy of each level of increase, the rate of finished product will be reduced by 1.5 ~ 2% so a price increase of 200 yuan / ton). Precision slitting machine with double knife base and double reel, slitting width 29～500mm.

The second phase of the main plant to build an additional 10,000m². Equipment mainly has Austrian technology can produce width <800mm thickness <4mm strip quenching line a (can fill the domestic blank, expected capital 15 million, monthly output of 1,000 tons). Put in an annual output of 60,000 tons of thickness <13mm, width <800mm high-pressure water surface oxide treatment production line (estimated capital 10 million), an additional annual output of 60,000 tons of φ380x1000 ~ 1500mm wide plate slitting production line (estimated capital 4 million), two high-precision AGC rolling mill (estimated capital 7 million), two narrow strip slitting machine (estimated capital 5 million). million).